|
<
Back >
|
Turntable Washers
The
turntable washer is by far our best selling design. The large number of options
available for this unit make it very versatile and a great addition in most
industrial applications.
Specifications:
- Turntable diameters from 28" to 156"
- Work height from 36" to 156"
- Weight capacity from 200 pounds to 60,000 pounds
- Heat sources: Electric, gas or steam
- Pump pressures from 40 PSI to 10,000 PSI
- Process stages:
- Up to 5 recirculating stages
- Blow-off stage
- Fresh Water Rinse
- Can meet any power requirements(240V, 380V, 480V and
575V)
Determine
your process specifications
from
the table below:
Standard Dimensions*
|
Optional Turntable Capacities
|
Optional Process Stages
|
Optional Heating Methods
|
Turntable Diameter
|
Work Height
|
| 28" |
36" |
1,000 lbs. |
First re-circulated stage (wash or pre-wash) |
Electric |
| 36" |
48" |
2,500 lbs. |
Second re-circulated (wash or rinse) |
Steam |
| 42" |
60" |
6,000 lbs. |
Third re-circulated stage (rinse) |
Gas |
| 62" |
72" |
10,000 lbs. |
Fresh water rinse |
|
| 75" |
84" |
20,000 lbs. |
Blow-off |
|
| 88" |
96" |
40,000 lbs. |
Dryer |
|
| 100" |
108" |
60,000 lbs. |
Pump pressure to 1600 PSI |
|
| 124" |
120" |
|
|
|
| 148" |
144" |
|
|
|
|
156" |
|
|
|
|
Additional
Optional Features
-
7
Day Timer
- Additional cycle timers
- Blow-off, heated regenerative
- Blow-off, plant air
- Blow-off, regenerative
- Center nozzle pipe (fixed or oscillating)
- Centrifuge solid removal
- Chemical concentration maintenance system
- Cycle finish signals (light and/or horn)
- Door, Power operation (with swing-out turntable only)
- Door, side access
- Doors, double hinged (with fixed turntable only)
- Doors, guillotine (with fixed turntable only)
|
-
Exhaust
blower
-
Full
flow bag-type filter
-
High
level alarm package
-
Increased
pump capacity
-
J.I.C.
wiring
-
Level
control, automatic
-
Level
control, proximity switch
-
Load
tray
-
Loading
boom
-
Mirror
image construction
-
Oil
coalescing unit
-
Oil
skimmer (belt or disc)
-
Paint,
other than standard
-
Parts
basket
-
Parts
rack
-
Plastic
coated turntable inserts
|
-
Pressure
/ flow control valve and pressure gauge
-
Programmable
Login Controller
-
Proofing
test
-
Rust
inhibiting, Venturi injector
-
Sludge
baffle
-
Sludge
removal & grease skim conveyor
-
Sound
enclosure
-
Stainless
steel construction
-
Start-up
assistance
-
Swing-down
manifold
-
Tank
pump-out package
-
Temperature
controller, digital
-
Turntable
alignment and stop
-
Zero-discharge
multi-stage filtration unit
|
**
Other sizes and configurations available
|
